8218G Wireless ANDROID IOS APP GSM Home Security Alarm System DIY Kit with Auto Dial,APP Control by Text,not support wifi

Price: $1.81
Product prices and availability are accurate as of 2020-02-17 10:24:44 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

The alarm system up to 99 wireless zones, each wireless zones can be defined as one of the 8 zone types, each zone can setup the siren independently.There are 8 zone types(Normal,Stay,Intelligent,Help senior,Chime,Welcome,Emergency),if you set a door sensor into Chime or Welcome zone type,when the door be open,the alarm host will say"dingdong""Welcome". The alarm system can be used internationally,it can work under three conditions:No network,standalone on-site alarming;Put-in a GSM SIM card,Connect to landline,you can choose one of three ways or use all of them.The whole system complete with fully programmable main unit and wireless sensors.Before using,please kindly read manual and remove the insulating sheet inside sensors. No network,standalone on-site alarming:when there are alarming,the alarm panel built-in siren up to 80db and extra siren will make alert sound,somebody in home will know what's happened;The panel built-in Ni-Hi rechargeable battery will last about 8 hours,Door/Window contacts detect any forceful break-in,Passive motion sensors detect any suspicious movement or activity,Loud,wired siren up to 110dB alarm alerts neighbors and deters potential intruders,you can control the system via controller. Put-in a GSM SIM card:the alarm panel just support GSM SIM card need 2G service,in USA recommend T-Mobile,not support AT&T,when the sensor is triggered,the alarm panel will make a call or send alert message to the alert phone number (6 groups)you set before,you also can set CID number.In this case,the GSM(only)frequency is 850/900/1800/1900MHZ,which can be applied in all over the world,you can control the system via calling/sms,app,controller. Connect to landline:the alarm panel can work with landline,support ADSL format,if in your home it is Voip,you can use a modem to change it to ADSL.In this way,the alarm panel just make an alert call to alert phone number(6 groups)or CID number you can set,no SMS function,you can control the system via calling,controller.

Write a Review